Powder Coating

	BRAVO Airfluid The powerful BRAVO Airfluid coating system delivers the powder directly from the original drum. It can be operated both with a Corona or a Tribo spray gun. The integrated remote control of the guns, pre-defined coating recipes and a graphic user interface provide for an exceptional ease of use.
	BRAVO 50L As opposed to the Airfluid system, the BRAVO 50L conveys the powder from a steel container which can be dismantled. it is therefore extremely easy to clean. Fluidisation of the powder is achieved by the use of an integral fluid bed. This coating system is ideal for the manual coating of series production.

Unit Type	BRAVO Manual Powder Units
	Airfluid	50L Container
Weight Approx	39 kg approx	39 kg approx
Size W x H x T	480 x 1100 x 725mm	480 x 1100 x 725mm
Mains	Standard 230 VAC	85-250 VAC
Frequency	50-60Hz	50-60Hz
Air Inlet Pressure	6-8 bar	6-8 bar
Air Outlet Pressure	0.05 -5.5 Nm³/h	0.05 -5.5 Nm³/h
Construction	to EN 500050	to EN 50050
Usable Volume, Powder Container	-	50 L
Filling Capacity, Power Container	-	max 25kg

	PRIMA Airfluid For quick colour changes. The powder is supplied directly from the original drum. Control Unit EPG 2008 PRIMA powder feed unit Heavy duty equipment with pneumatic shaker table PEM-C3 or PEM-T3 powder spray gun.
	PRIMA 60L For medium to large production runs. The coating powder is fluidised in the large 60 litre stainless steel container and then supplied to the spray gun. Control Unit EPG 2008 Large 60L stainless steel container with P1-P1 powder injector Heavy duty equipment trolley PEM-C3 or PEM-T3 spray gun

For Corona Airmatic or Tribo powder guns please see the Wagner powder coating hand gun section.